top of page
GG4S - perseus v2

products - announcements - events - personal thoughts

GG Perseus RTA - RDTA atomizer by Golden Greek atomizers and mods

After the tremendous success of Iatty Reloaded RTA atomizer, our company went on to produce a brand new atomizer, based on Iatty configuration. It is none other than Perseus that possesses several features, which outweigh Iatty with ease. Perseus is an improved version of Iatty, it is one step forward.

Evidently, easy-to-operate atomizers are preferable. Atomizers such as those that do not require causing damage to the resistance or bringing the liquid into play, when in need of internal settings. In other words, devices that make vaping a pleasant experience are favored.

We wanting to produce a trouble-free atomizer that will allow less hand movement and more efficiency. That is why our company brought Perseus to the market. To give you also the ability to avoid coming into contact with the liquid, the Achilles heel of every other atomizer.

GG Perseus RTA - RDTA is simply an exquisite atomizer that is bound to satisfy all your vaping needs. Because of its superb design, as well as its unique ability to absorb liquid.

When we first designed Perseus, we had an RTA atomizer style in mind but as you know we can't help ourselves and we finally lunched an RDTA atomizer.

Perseus might have an extremely simple and elegant layout, but it surely possesses features that will blow your mind, overshadowing many atomizers in the vaping community.

Starting off with a full description of each and every piece:

Drip tip: Small and elegant, exactly like Iatty's drip tip. Although it's black in color, the user also has the ability to replace it with an ultem one.

Refilling cap: The refilling method is ridiculously easy. Contrastingly with atomizers on which you need to remove 2 caps to refill, Perseus facilitates the process. While there is no need to screw or unscrew any caps, you simply turn the cap either exposing or covering the refilling holes. Consequently, after refilling, a turn is enough to shut the holes. At the same time, you do not have to align the refilling holes of the cap with the holes of the main body, as the cap locks exactly at a position exposing the holes.

Removing the cap is a simple procedure. You turn it towards one side and pull it out,

Furthermore, there is no reason to align the cap refilling holes with the main body holes because the cap stops exactly to the open position.

Another advantage is that the refilling holes are not slots but actual holes. That way, your bottle stays always steady when you refill without fearing that it will slip left or right making a mess of liquid.

The cap also has 2 symmetric channels around it. These channels add a wonderful artistic touch to the exterior part and also give you the ability to remove the cap with ease.

Main Body: It is made of glass, trapped between 2 metal parts (the bell and the glass holder) and it's smaller than Iatty's. Iatty's main body length is 40mm when it carries 2ml of liquid and 49mm when it carries 4ml of liquid, while Perseus is one of the smallest atomizers on the market. Its length is 34mm when it holds 2ml of liquid and 44mm when it holds 4ml of liquid.

Extended configuration: Perseus also carries an extended glass holder that allows you to increase liquid capacity. It differs from Iatty's extension, where you screw the extension upon the glass holder. On Perseus, you have to unscrew the glass holder and screw the extended one.

Air pins: Perseus gives you the ability to change the air pins to adjust air. It's a technique that Golden Greek invented when Tilemahos Armed emerged and it doesn't require to empty the liquid from the tank or cause damage the resistance.

The air pins have holes of the following diameters:






0 hole (as a 0,8mm air pin)

GG Perseus standard package includes the 1,5mm and the 4mm pins for standard MTL and DTL vaping style. You can purchase the rest of the pins separately.

Air Ring: The air ring is made in a bit of a different way than Iatty's ring. Perseus carries an air ring with small holes around it, instead of a slot. The small holes give you the ability for further adjustments of air (after you put the correct air pin in place).

The air ring locks at fully-open and fully-closed position. At any position, you have the ability to remove it.

The air pin can be adjusted easily. However, inside the "spare o-rings" bag you will find a bigger o-ring that makes the air ring turn a little harder. It's a matter of choice.

Exit Air Pin: It is widely accepted that air plays a significant role in taste. The taste depends on the quantity of the air as well as the way it hits the resistance. That's exactly why we brought air pins to the market. What is yet not as well-known is that the way that air leaves from the resistance is also crucial, especially on MTL vaping style. That's why we created a pin with a specific air hole upon the resistance. That way, the air will go through a specific hole before it reaches the user's mouth.

A question coming of everything previously mentioned is why the air that leaves from the resistance is so important. That's because depending on the exit pin, the quantity of air that will "hug" the resistance wire changes. That is considered a key factor in change of taste. More pins constructed this way are expected.

You can add or remove this air pin without coming in with the liquid.

To remove the Exit Air Pin:

Remove the Drip Tip and the Body. Hold the Body upside down, push the Exit Air Pin using a pen and then put the Body and Drip Tip back in place.

To add the Exit Air Pin:

Remove the Drip Tip, push the Exit Air Pin inside the refilling cap using a pen, and then put the Drip Tip back in place.

Base: The base is made like Iatty's base. It carries an innovative collector tank on its lower part, to keep the excess liquid from pouring out, even when you lay Perseus down horizontally.

Liquid control: The liquid control system works exactly like on Iatty. Simply turn the body left or right, and the liquid holes will be either exposed or covered.

Bell: The bell carries another innovative system: There is a dent, moving inside a slot of the base. When the dent meets the end of the slot (while you turn the body counterclockwise), you are given the ability to unscrew the atomizer from the mod. Thanks to the dent, you don't have to hold the atomizer grabbing onto the air ring to unscrew it, (that is a very uncomfortable way to hold it like on many other devices on the market), but you can hold it grabbing onto its main body, without the danger of something else getting unscrewed.

Another outstanding feature is the top of the bell, which is much smaller than the rest of the bell's chamber. That way, the moisture concentrates before it reaches your mouth.

Deck: The deck is also different from Iatty's deck. The resistance is now lower in comparison with the channels, allowing the wick to be fed more quickly and effectively. The deck has 2 screws that hold the wire in place, based on a Γ design.


Perseus characteristics:

  • Diameter: 22mm

  • Height: 34mm (without the drip tip) when holding 2ml of liquid

  • Height: 44mm (without the drip tip) when holding 4ml of liquid

  • Material: Stainless Steel 316L

  • Material between posts: PEEK

  • Serialized from 1 to 1000

Package includes:

  • 1 x Perseus (The 1,5mm Air Pin and the Exit Pin are installed)

  • 1 x Extended Glass Holder

  • 1 x 4mm Air Pin

  • 1 x set of o-rings + 1x set of wire holders


In case you disassembled Perseus and you need to assemble it again:

  • Screw the center post extension by hand and then use pliers to screw it further.

  • Screw as hard as you can the deck inside the base.

  • Screw hard the glass holder by hand and then use pliers with "noses" to screw it.

  • a bit further (Not as hard as the center post extension).

In case you remove the body to check your resistance and you need to put it back in place:

  • Put the body in place and open the liquid control. If all the 3 holes open, you are on the right direction. If not all holes open, then take off the body, turn your hand at 90 degrees and put it back again.

Making the resistance:

  • Put the cotton up to the bottom of the feeding channels.

  • Also make cotton fluffy and cover all the 3 feeding holes.

  • Don't push the cotton hard to the end of the feeding channels.

You can purchase the following after-sales parts (spares):

  • Air pins with holes of various diameters.

  • Engraved Metal Body in polished and mat finish.

  • Engraved Ultem Body.

  • Ultem Drip Tip.

Perseus RTA - RDA atomizer future:

In the future, we are planning on providing you with new spares for Perseus, such as different body materials and colors, air rings and more, as well as a brand new part that hasn't appeared yet on the market.

It is a Golden Greek atomizers and mods construction, vape it, you deserve it!


The Professionals and Inventors of Modern Vaping

atomizers  mods  and  liquids

bottom of page