top of page
GG4S - perseus v2

προϊόντα - ανακοινώσεις - εκδηλώσεις - προσωπικές σκέψεις

Perseus V2, RTA - RDA - SQUONK - Side air - Bottom air atomizer

Perseus V2 RTA - RDTA -SQUONK is the new arrival of Perseus family that combines the Perseus V1 with its updated deck.

We introduce you the Perseus V2, an atomizer with much more abilities than the V1 version. What it can do? More than you can think, more than can you imagine.

Perseus V2 is made to give more freedom to the users. It offers side air control and BF option.

The existing options stay untouched. But we do have made some improvements like:

1. the exit pin that reduces the air after the resistance, is made with a different cone to avoid a sound that you were hearing during inhale.

2. The air ring has 2 slots instead of holes to avoid any whistling during inhale.

3. the posts on the deck are made slightly different to hold all wires even those with the smallest diameter.

5. The stopper on the AD ring sits higher, so you don't see anymore the small opening when you look Perseus V2 from the base.

6. The AD ring doesn't come off the base in any position but stays in place until you turn it to meet the right slot.

7. The body doesn't come off when you turn it left at the end of the bayonet, to avoid any accidental body separation from the base while you store your Perseus.

8. We put a mark on the deck, so you can find easier where exactly the body fits to the base.

9. The upper o-ring of the deck is harder, so more durable.

10. The refilling cap has no slots anymore. Its fully polished and smooth.

11. More accessories are coming that fit both Perseus V2 but V1 too, like new air pins, black plastic transparent body, new black polished ultem body and black polished ultem air ring for the dripper mode, among other existing accessories from Perseus V1 batch like ultem drip tip, SS body in polished and mat finish and yellow ultem body.

Starting off with a full description of each and every piece:

Drip tip: Small and elegant. Although it's black in color, the user also has the ability to replace it with a yellow ultem one.

Refilling cap: The refilling method is ridiculously easy. Contrastingly with atomizers on which you need to remove 2 caps to refill, Perseus facilitates the process. While there is no need to screw or unscrew any caps, you simply turn the cap either exposing or covering the refilling holes. Consequently, after refilling, a turn is enough to shut the holes. At the same time, you do not have to align the refilling holes of the cap with the holes of the main body, as the cap locks exactly at a position exposing the holes.

Removing the cap is a simple procedure. You turn it towards one side and pull it out,

Furthermore, there is no reason to align the cap refilling holes with the main body holes because the cap stops exactly to the open position.

Another advantage is that the refilling holes are not slots but actual holes. That way, your bottle stays always steady when you refill without fearing that it will slip left or right making a mess of liquid.

Main Body: It is made of glass, trapped between 2 metal parts (the bell and the glass holder). Perseus V2 is one of the smallest atomizers on the market. Its length is 34mm when it holds 2ml of liquid and 44mm when it holds 4ml of liquid.

Extended configuration: Perseus V2 also carries an extended glass holder that allows you to increase liquid capacity. It differs from Iatty's extension, where you screw the extension upon the glass holder. On Perseus V2, you have to unscrew the glass holder and screw the extended one.

Air pins: Perseus V2 gives you the ability to change the bottom and side air pins to adjust air. It's a technique that Golden Greek invented when Tilemahos Armed emerged and it doesn't require to empty the liquid from the tank or cause damage the resistance.

The air pins have holes of the following diameters:

bottom air pins:






0 hole (as a 0,8mm air pin)

side air pins:

No side air

No side air with spit-back protection

2mm hole

1,5mm hole

What options Perseus V2 gives you:

Only bottom air control.

Only side air.

Bottom and side air.

Bottom air control and external air.

Bottom air control and side air with spit-back protection.

BF option.

liquid control.

Easy refilling without removing the cap.

Transform Perseus V2 to a wonderful dripper, by removing the body and the air ring and replace them with the black ultem set.

Your air and BF choices in TANK MODE and in DRIPPER MODE are:

MTL bottom air and OPEN MTL side air.

MTL bottom air and OPEN MTL side air with spit-back protection and air rotation.

MTL bottom air and DTL side air.

MTL bottom air and DTL side air with spit-back protection and air rotation.

MTL bottom air and EXTERNAL air.

DTL bottom air and OPEN MTL side air.

DTL bottom air and OPEN MTL side air with spit-back protection and air rotation.

DTL bottom air and DTL side air.

DTL bottom air and EXTERNAL air.

BF with MTL side air.

BF with DTL side air

Especially on tank mode, you can have different liquid strength and/or different liquid taste on the bottle of the squonker and the tank of Perseus.

Your choices in BF MODE are:

BF with MTL side air.

BF with DTL side air.

To transform Perseus V2 into a dripper, you simply remove the body and put the ultem cap. It's that simple!. In case you want a full black dripper, you can also replace the air ring.

There is no reason to check if the ultem cap is locked in the right position because every position is the right one for the cap. Just push it on the base and you are ready to squonk on your Perseus dripper.

Perseus V2 in dripper mode is small. It is at 24mm in total height.

The ultem cap and the ultem air ring are at 22mm.

The openings of positive and negative where you put the legs of the wire are not at the same level. That way you can put your wire easier in place.

ps...... All Perseus V1 bottom air pins fit on Perseus V2.

GG Perseus V2 standard package includes the bottom air pins 1,5mm and 4mm and the side air pins of no side air, no side air with spit-back protection, 2mm hole

and 1,5mm hole, for standard MTL and DTL vaping style. You can purchase the rest of the bottom pins separately.

Air Ring: Perseus V2 carries an air ring with a slot around it, instead of small holes, to avoid any whistling during inhalation.

The air ring locks at fully-open and fully-closed position. At a specific position, you have the ability to remove it.

The bottom and side air pins can be changed easily. To change the side air pins, you remove Perseus's body, change the pin and put the body back. To change the bottom air pins, you unscrew Perseus V2 from the mod, unscrew the previous pin and screw the new one.

Exit Air Pin: It is widely accepted that air plays a significant role in taste. The taste depends on the quantity of the air as well as the way it hits the resistance. That's exactly why we brought air pins to the market. What is yet not as well-known is that the way that air leaves from the resistance is also crucial, especially on MTL vaping style. That's why we created a pin with a specific air hole upon the resistance. That way, the air will go through a specific hole before it reaches the user's mouth.

A question coming of everything previously mentioned is why the air that leaves from the resistance is so important. That's because depending on the exit pin, the quantity of air that will "hug" the resistance wire changes. That is considered a key factor in change of taste. More pins constructed this way are expected.

You can add or remove this air pin without coming in with the liquid.

To remove the Exit Air Pin:

Remove the Drip Tip and the Body. Hold the Body upside down, push the Exit Air Pin using a pen and then put the Body and Drip Tip back in place.

To add the Exit Air Pin:

Remove the Drip Tip, push the Exit Air Pin inside the refilling cap using a pen, and then put the Drip Tip back in place.

Base: The base carries an innovative collector tank on its lower part, to keep the excess liquid from pouring out, even when you lay Perseus down horizontally.

Liquid control: Simply turn the body left or right, and the liquid holes will be either exposed or covered.

Bell: The bell carries another innovative system: There is a dent, moving inside a slot of the base. When the dent meets the end of the slot (while you turn the body counterclockwise), you are given the ability to unscrew the atomizer from the mod. Thanks to the dent, you don't have to hold the atomizer grabbing onto the air ring to unscrew it, (that is a very uncomfortable way to hold it like on many other devices on the market), but you can hold it grabbing onto its main body, without the danger of something else getting unscrewed.

Another outstanding feature is the top of the bell, which is much smaller than the rest of the bell's chamber. That way, the moisture concentrates before it reaches your mouth.

Deck: The resistance sits low in comparison with the channels, allowing the wick to be fed more quickly and effectively. The deck has 2 screws that hold the wire in place, based on a Γ design.


Perseus V2 characteristics:

  • Diameter: 22mm

  • Height: 34mm (without the drip tip) when holding 2ml of liquid

  • Height: 44mm (without the drip tip) when holding 4ml of liquid

  • Material: Stainless Steel 316L

  • Material between posts: PEEK

  • Serialized from 1000 to 2000

Package includes:

  • 1 x Perseus (The 1,5mm Air Pin and the Exit Pin are installed)

  • 1 x Extended Glass Holder

  • 1 x 4mm Air Pin

  • 1 x 1,5mm Air pin

  • 1 x 1,5mm side Air pin

  • 1 x zero side Air pin with spit-back protection

  • 1 x zero air side air pin

  • 1 x full air side Air pin

  • 1 x BF pin

  • 1 x set of o-rings + 1 x set of wire holders


In case you disassembled Perseus V2 and you need to assemble it again:

  • Screw the center post extension by hand and then use pliers to screw it further or use a hex tool.

  • Screw the deck inside the base as hard as you can.

  • Screw hard the glass holder by hand and then use pliers with "noses" to screw it a bit further (Not as hard as the center post extension).

In case you remove the body to check your resistance and you need to put it back in place:

  • Put the body in place and open the liquid control. If the 2 holes open, you are on the right direction. If not all holes open, then take off the body, turn your hand at 90 degrees and put it back again.

Making the resistance:

  • Put the cotton up to the bottom of the feeding channels or slightly higher.

  • Also make cotton fluffy to cover the 2 feeding holes.

  • Don't push the cotton hard to the end of the feeding channels.

You can purchase the following after-sales parts (spares):

  • Air pins with holes of various diameters.

  • Engraved Metal Body in polished and mat finish.

  • Engraved Ultem Body.

  • Black transparent body.

  • Ultem Drip Tip.

  • Black Ultem dripper body.

  • Black Ultem air ring.

Perseus V2 RTA - RDA - SQUONK atomizer future:

In the future, we are planning on providing you with new spares for Perseus, such as different body materials and colors, air rings and more.

It is a Golden Greek atomizers and mods construction, vape it, you deserve it!

PS.... Perseus v2 earned the award of the best atomizer in Greek vapexpo in September 2021


Οι επαγγελματίες του ατμίσματος

ατμοποιητές - συσκευές - υγρά αναπλήρωσης

bottom of page